Yongnuo yn-622n-tx, User Manual

Page: 17 / 41

1).Install the YN-622N-TX controller on the camera’s hot shoe,
and use LS-2.5 series shutter connecting cable(may
additional purchases) to connect the controller and camera.
Ÿ
Support single shot only.
Ÿ
If the controller does not installed on the compatible
camera’s hot shoe, the shutter will release when pressing
the [TEST] button of transceiver.
2).Long press the [TEST] button of YN-622N transceiver to
focus, loosen the [TEST] button to shot. If the flash installed
o n t h e Y N - 6 2 2 N t r a n s c e i v e r, t h e f l a s h w i l l f i r e
synchronously.
Ÿ
Use the YN-622N transceiver for wireless transmitting, the
YN-622N-TX controller as the shutter signal output.
Shutter Release Function
The compatible shutter release cable list:
LS
-
2
.
5/N1:
LS - 2
.
5/N3:
LS
-
2
.
5/N2
(
Optional
):
D200/D300/D300S/D700/D800
D90/D600/D3100/D3200/D5000Series/D7000Series
D70/D70S/D80