Radio Transmission Slave Unit Setting
Radio Transmission Flash Shooting
Short press master unit
[ ]
button to select grouping orderly, press
[
MODE
] to set the flash mode
of the current group, the speedlite supports M/MULTI flash mode and --(no flash).Press [
]
to set
the focal length of the speedlites in different groups, in Multi mode, short press [
]
to set
stroboscopic times and frequency. The flash mode, flash output, focal length of speedlites in groups
A-F can be set differently, among of the speedlites, the setting of the master control flash is set to be
the same as that of group A. When the camera's shutter button is pressed, the speedlites in all groups
fire according to the setting of the master control unit with the synchronizing signal of camera.
-13-
The radio transmission modes of master control unit and slave unit need to be set to be consistent
through customs function setting.
The flash parameters of YN860Li can be set remotely through YN560-TX(II) wireless flash trigger,
when RF-602/RF603/RF605 are used to send or receive signals,the flash mode or output needs to
be set on the speedlite of slave unit.
Short press the [ ]
button
of the speedlite until
[ ] displays, the
flash is set to be slave unit.
Long press [ ]button to set slave unit and master unit to be in the
same channel.
Short press [ ]to set the grouping
(
A-F
)
of the slave unit.
