Yongnuo Speedlite YN468-II User Manual Download Page 11

VI. Specifications 

Guide number                          33

 

Circuit design             Insulated Gate Bipolar Transistor (IGBT) 
Flash mode               TTL, M, Multi, S1, S2 
Zoom range               auto, 24, 28, 35, 50, 70, 85 mm 
Vertical rotation angle       -7~90 degrees 
Horizontal rotation angle     0~270 degrees 
Power Supply                          4×AAsize batteries (Alkaline or Ni-MH   

are usable) 

Lighting times            100~1500 times (AA alkaline cell used) 
Recycle time              less than 5s (AA alkaline cell used) 
Color temperature          5600k 
Flash time                1/800s~1/20000s 
Flash control              TTL auto flash or manual Level 8 light  

quantity output control with 0.3 stop   
increment 

Additional features         FEB, FEC, FEL, Automatic zooming,  

Rear-curtain Sync. 

Dimensions                              60

×

72

×

172 mm(extended state) 

Net weight                                300g 
Accessories               Flash light (1), protecting bag (1), and  

mini stand(1) and manual (1) 

 
 
 

VII. Possible problems during use and solutions 

1. The AF LED is not on? 

Check if this camera needs flash light 

assist AF or if it supports the function; some cameras requires 
focucal points to be in the center, focus method to adopt AF-S and 
requires dark environment; check if some settings in the camera 
are forbidden.   
 

2. Photos are under exposure or over exposure?

 Check if the set 

shutter, aperture and ISO are too near the flash limit or if some 
settings including exposure compensation in relation to flash are 
proper. 

3. Vignetting appears in photos or only part of the subject is 
illuminated? 

This product has a designed light head zoom range 

of 24-85 mm, and is currently not compatible with full frame 
camera system. You may pull out the wide-angle diffuser to widen 
the flash range. 
 

4. 

Because of differences among various models of cameras and 

different personal preferences, the use of this product may cause 

Summary of Contents for Speedlite YN468-II













Reviews: