Use Guide
1. Air tube installation
Install the high-press tube at tighten the tube
2. Power on
3.
Preset inflation pressure
Mode switch
Press and hold the on / off
button to start, The air pump
automatically
shut
down
without any operation in 3
minutes in power on state.
Press “On/Off”
button
can be switched
between the following five scenarios.
Please select the correct air press unit
before inflation.
No mode light on: The preset pressure
can be adjusted freely. Press and hold
“-” key can switch between psi/bar
(the value and unit can be memorized)
Adjustable range:3-150psi
Bicycle mode light on：Default 45 psi
Adjustable range:30-65psi
A
Motorcycle mode light on：Default 2.4bar
Adjustable range:1.8-3.0bar
Automobile mode light on：Default 2.5bar
Adjustable range:1.8-3.5bar
Ball mode light on：Default 8 psi
Adjustable range:4-16psi
