6
Fig. 5-7 Error Code Indicator Interface
When an error code appears on the display interface, please conduct troubleshooting in time. Otherwise, your e-bike will
not work normally.
6. General setting
All parameters can only be set when your e-bike stops.
The steps for general setting are as follows:
In the power-on state, when the display shows the speed of 0,
(1) Press and hold the buttons
and
at the same time for more than 2 seconds to enter the selection interface
of general setting options;
(2) Press the button
/
to switch the selection interface of general setting options, and press the button
to
enter the parameter modification interface;
(3) Press the button
/
for parameter selection;
(4) Press the button
to save the parameter and return to the selection interface of general setting options;
(5) Press and hold the button
to save the parameter and exit the selection interface of general setting options.
The following selection interfaces of general setting options are available:
6.1 Trip distance reset
tC refers to the trip distance reset item. tC-n means not to reset the trip distance, and tC-y means to reset the trip
distance.
Press the button
to enter the parameter modification interface. Press the button
/
for parameter selection.
Press the button
to save the parameter and return to the selection interface of general setting options.
