21 ·
· 20
SPECIFICATIONS
YZ-114 PLUS
YZ-114 PLUS
Input Power
Batteries
Charge Current
Discharge Current
Balance Current
Trickle Current
Operating Modes
Charge Voltage
Peak detection
Interval time between cycles
Charge Time Cutoff
Capacity Cutoff
Memory Profiles
Battery Voltage
Measurement
Reverse Protection (Output)
Internal Resistance Measurement
USB
USB Charging
DC Input Voltage Protection
Charge Power
Discharge Power
Cooling Method
Operating Environment
Storage Environment
Display
Weight
Dimensions
AC
DC
LiPo/LiIon/LiFe/LiHV
NiMH/NiCd
Pb
LiPo/LiIon/LiFe/LiHV
NiMH/NiCd
Pb
LiPo/LiIon/LiFe/LiHV
NiMH/NiCd
Pb
LiPo/LiIon/LiFe/LiHV
NiMH/NiCd
LiPo/LiIon/LiFe/LiHV
NiCd/NiMH
Pb
LiPo
LiIon
LiFe
LiHV
NiMH/NiCd
Pb
LiPo/LiIon/LiFe/LiHV
(STORAGE mode)
NiMH/NiCd
NiMH/NiCd (CYCLE)
100~240 V (50~60 Hz)
11~18 V
1~6 cells
1~15 cells
1~10 P (2~24 V)
0.1~1A
1.1~6A
0.1~2A
Max. 200 mA / cell
50mA~300mA
、
OFF
BALANCE, CHARGE, DISCHARGE,
FAST CHG, STORAGE
CHARGE, AUTO CHG, CYCLE (Chg→Dischg,
Dischg→Chg), Repeak (1~3 times), Discharge
Charge, Discharge
4.18~4.25V/cell
4.08~4.2V/cell
3.58~3.7V/cell
4.25~4.35V/cell
Delta peak detection
2.4 V/cell
3.80 V /3.70 V / 3.30 V / 3.90 V (per cell)
5~15mV/cell(Default: 4mV/cell)
1~60 minute(s)
1~720 minute(s), OFF (Default: 120 minutes)
100~50000mAh, OFF (Default: 5000mAh)
Maximum of 10 profiles for charge/discharge
Available for LiPo/LiIon/LiFe/LiHV
Standard equipped
Use of main and balance ports
PC connection and firmware updates
5V 2.1A (±5%)
Low Voltage Alarm
High Voltage Alarm
AC/DC Input
10W
Air-cooled by internal fan
Temperature: 0~40 Humidity:0~80%
Temperature: 10~60 Humidity: 20~70%
128 × 64 LCD with backlight
552 g
150 mm(length) × 145 mm(width) × 80 mm(height)
10~11V
18~19V
50W (±10%)
■ Liability Exclusion
This charger is designed and approved exclusively for use with the types of battery statedin
this instruction manual.
Yokomo is not liable for any loss or damage, whether direct or indirect, incidental or
consequential, or from any special situation, arising from the use, misuse or abuse of this
product.
Our obligation to pay compensation, regardless of the legal argument employed, is limitedto
the invoice value of those Yokomo products which were immediately and directlyinvolved in the
event in which the damage occurred.
By using this product, the user is deemed to have accepted theses terms and conditions.
■ Customer Service
To receive customer service, a valid proof of purchase will be required.
Forcustomer service outside of Japan, please first contact your local dealer. Please
understand Yokomo cannot provide service toend user outside of Japan directly.
Only Yokomo can conclude whether a product is defective. Resellers, dealers and
distributors do not have the authority to conclude whether a product is defective.
If you have any questions which are not mentioned in the manual, pleasefeel free to send e-
mail to [email protected].
LIABILITY EXCLUSION
