- 1 -
1)
Inspection of Product and Accessories, and Outline and Specifications of Product
Thank you for your selection of HOPE CERAMIC JET GAS BURNER type CJ. Please carefully read this
instruction manual in order for you to be fully satisfied with the performance of this burner and to secure
the safety in operation, maintenance and inspection. Also, please be sure to deliver this instruction
manual to the end u-ser, as well as to the constructor.
Inspection
Check to confirm whether or not the product is exactly in accordance with your order by referring to
the nameplate and the specification table given below. Also check for damage and other irregularities
caused by and during transportation.
Outline
HOPE CJ TYPE CERAMIC JET GAS BURNER is a direct ignition, nozzle mixing type gas burner using
a light-weight, compact ceramic tube. As this burner uses no burner tile, its installation in furnace
bodies, maintenance and others are easy. Flames, which are stirred in the furnace by high-speed
combustion gas of 130m/sec, make the distribution of in-furnace temperature homogeneous. This
burner can also be used for hot air of 300℃. Thus, this gas burner can be used widely as a gas burner for
various heat treatment furnaces, heating furnaces and the like.
Specification
Type
Capacity
kW (kcal/h)
Connection (Rc)
Mass
(Kg)
Air
Gas
CJ-1
58 (50,000)
1 1/2
1/2
16
CJ-2
140 (120,000)
2
3/4
16
CJ-3
233 (200,000)
2 1/2
1
26
CJ-4
372 (320,000)
3
1 1/2
29
※Standard Pressure：Gas 3～10kPa Air 6kPa
