background image

•     EN countries: the appliance can be used by children aged 

       from 8 years and above and persons with reduced physical, 

       sensory or mental capabilities or lack of experience and 

       knowledge if they have been given supervision or 

       instruction concerning use of the appliance in a safe way 

       and understand the hazards involved. Children shall not 

       play with the appliance. Cleaning and user maintenance 

       shall not be made by children without supervision.

•     Animals and children may climb into the machine. Check 

       the machine before every operation.

•     Young children should be supervised that they do not  play

       with the appliance.

•     Machine may be very hot during the operation. Keep kids 

       and pets far away from the machine during the operation

       

•     Plug must be accessible after installation.

very wet rooms as well as in the rooms with explosive or

       caustic gas.

•     

•     The washing machine with single inlet valve only can 

 

be   

       connected to the cold water supply. The product 

       inlet valves should be correctly connected to the hot water 

       and cold water supply.   

with double  

       

 

Remove all packages before using the appliance. Otherwise, 

       serious damage may result.

Risk of explosion!

•     

•     

Do not wash or dry articles that have been cleaned in, washed 

       in, soaked in, or dabbed with combustible

 

or

 

explosive 

       substances( such as wax, oil, paint, gasoline, degreasers, 

       dry-cleaning solvents, kerosene, etc.) This may result in 

       fire or explosion.

Before

 

hand

 

thoroughly

 

rinse

 

items

 

of

 

washing

 

by hand.

5

SAFETY INSTRUCTIONS

Risk

 

to

 

children

!

Summary of Contents for WMT82YOK























Reviews: