IM 01C50B01-01E
7-5
7. GENERAL SPECIFICATIONS
Factory setting (
䉫
)
T0705.EPS
Tag No.
Input sensor type
Lower bound of calibration range
Upper bound of calibration range
Unit of calibration range
Damping constant
Sensor burnout
Output when transmitter fails
Left blank if not specified in order
“Pt100, 3-wire” if not specified in order
“0” if not specified in order
“100” if not specified in order
“
°
C” if not specified in order
2 seconds
High side (110%, 21.6 mA DC)
*1
High side (110%, 21.6 mA DC)
*2
*1: When option code C1 is specified, Low takes effect (–2.5%, 3.6mADC).
*2: When option code C1 is specified, Low takes effect (–5%, 3.2mADC or less).
7.2 Model and Suffix Codes
Model
Basic Specification Codes
Description
YTA110
YTA310
YTA320
Temperature transmitter (1 input type)
High precision temperature transmitter (1 input type)
High precision temperature transmitter (2 input type)
Output
signal
–D . . . . . . . . . . . . . . . . . . . .
–E . . . . . . . . . . . . . . . . . . . .
–F . . . . . . . . . . . . . . . . . . . .
4 to 20mA DC output, BRAIN communication type
4 to 20mA DC output, HART communication type
FOUNDATION Fieldbus communication type
*1
A . . . . . . . . . . . . . . . . .
Always A
Electrical
connection
0 . . . . . . . . . . . . . . .
2 . . . . . . . . . . . . . . .
3 . . . . . . . . . . . . . . .
4 . . . . . . . . . . . . . . .
G1/2 female
1/2 NPT female
Pg13.5 female
M20 female
Built-in indicator
D . . . . . . . . . . . .
N . . . . . . . . . . . .
Digital indicator
None
Mounting bracket
B . . . . . . . . .
SUS304 Stainless steel 2-inch horizontal pipe mounting
*2
SUS304 Stainless steel 2-inch vertical pipe mounting
*2
None
D . . . . . . . . .
Additional specifications
/
Additional specifications
T0703.EPS
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
—
*1: Applicable for YTA320 only.
*2: Use bolts for wall mounting.
N . . . . . . . . .
7.3 Optional Specifications
Failure alarm up-scale: output status at CPU failure
and hardware error is 110%, 21.6 mA or more.
Sensor burnout is also set to ‘High’: 110%, 21.6 mA
䊊
C3
Failure alarm down-scale: output status at CPU
failure and hardware error is –5%, 3.2 mA or less.
Sensor burnout is also set to ‘Low’: –2.5%, 3.6 mA
Addition of Degree F and Degree R unit
Output signal low-side: –5 %, 3.2 mA DC or less.
Sensor burnout is also set to ‘Low’: –2.5 %, 3.6 mA DC
Housing Material: SCS14A Stainless steel
䊊
䊊
䊊
䊊
䊊
䊊
䊊
Epoxy resin coating
P7
P1
P2
E1
D2
C2
C1
A
X1
Munsell renotation code: NI1.5 Black
Munsell renotation code: 7.5BG4/1.5, Jade green
䊊
Power supply voltage: 10.5 to 32 V DC
Allowable current: Max. 6000A(1
⫻
40
s),
repeating 1000A(1
⫻
40
s) 100 times
Metallic silver
Munsell renotation code: 7.5R4/14 Red
䊊
⫻
䊊
䊊
Sensor matching function
*2
䊊
RTD Sensor matching function
CM1
䊊
䊊
䊊
䊊
PR
䊊
䊊
䊊
䊊
䊊
䊊
NAMUR NE43
compliant
*2
Item
Descriptions
Painting
Lightning protector
Code
Output signal low-side in
Transmitter failure
*2
Description into “Descriptor” parameter of HART protocol.
(max. 16 characters)
䊊
CA
䊊
Data Configuration
*2
Stainless Steel Housing
*1
Calibration Unit
Output signal limits:
3.8 mA to 20.5 mA
Amplifier cover only
Amplifier and Terminal covers
Color change
Coating change
T0704.EPS
YT
A110
YT
A310
YT
A320
*1 : Not applicable with other option codes, except for A, C1, D2 and CM1.
*2 : Not applicable for output signal code F.
