3-5
IM WT5000-02EN
On the 4-, 8-, and 16-Value Displays
Select the displayed item number.
The number increases from the upper left to the lower right of the screen.
Closes the menu
Set the displayed items.
You can set the following items for displaying measurement
functions.
• Voltage, current, active power, power factor: See section 3.2
• Apparent power, reactive power, corrected power: See section 3.3
• Phase difference, frequency (voltage, current): See section 3.4
• Computed values (numeric, event): See section 3.5
• Integrated value: See section 4.2
• Harmonics: See section 5.2
• Motor evaluation: See section 9.2
• External signal: See section 10.2
Selects the input element or wiring unit to be configured
• Input element options
When the displayed item is set to something other than motor evaluation:
Element1 to Element7
When the displayed item is set to motor evaluation: Motor1 to Motor4
• Wiring unit options: ΣA, ΣB, ΣC
Selects the harmonic order to be set
This is for the harmonic orders display (see section 5.2).
Resets the displayed items.
On the Matrix Display
Select the displayed item number (displayed row).
The number increases from top to bottom on the matrix display.
Example: If you select 3, the third row from the top is displayed.
Closes the menu
Set the displayed item.
See “On the 4-, 8-, and 16-Value Displays.”
Selects the harmonic order to be set
This is for the harmonic orders display (see section 5.2).
Resets the displayed items.
Configure the columns to display.
3.1 Setting the Display Format
