16-3
IM WT5000-01EN
Store Count (Store Count)
• You can select a value between 1 and 9999999.
• Storage will stop before the specified storage count if the storage destination runs out of available memory or
the stored data size exceeds the maximum value (1 GB).
Viewing and Optimizing the Maximum Storage Count (Optimize Count)
• This instrument computes the maximum storage count for the storage destination according to the number of
data types specified in the
• You can set the storage count to a value from 0 to the computed maximum storage count.
• You can select Set to set the maximum storage count to the current storage count. However, you cannot do
this if the current storage count is 0.
• If you enable automatic CSV conversion (Auto CSV Conversion) and set the storage destination to a
USB memory device, the maximum storage count is computed with 20% of the available USB memory
designated as valid for stored data (*.WTS and *.HDS files).
• If you specify the internal memory for the save destination, of the maximum values that meet the following
two conditions, the smaller value becomes the maximum value.
• Maximum store count calculated from the size of the internal memory.
• Maximum store count calculated by assuming 20% of the free space on the save destination USB
memory device to be the effective memory space for the store data (*.WTS and *.HDS files).
• When the storage mode is single shot, you cannot view or optimize the maximum storage count.
• If the maximum storage count is displayed as 0, there is not enough available space in the storage
destination. Make more space available, by deleting files for example.
• If you change the number of stored items specified in
after you set the storage count, the
maximum storage count will change, and you will need to set the storage count again.
16 Data Storage
