YOKOGAWA WT500 User Manual Download Page 85

Page: 85 / 360

3-24

IM 760201-01E

3.12 Setting the Date and Time

Procedure

Press

MISC

to display the Misc Menu.

Turning the Date and Time Display On or Off

Use the

cursor keys

to select Date/Time.

Press

SET

to display the Date/Time dialog box.

Use the

cursor keys

to select Display.

Press

SET

to select ON or OFF.

Setting the Date or Time Manually

Use the

cursor keys

to select one of the Date (year, month, and day) or Time (hour,

minute, and second) boxes.

Press

SET

to display an entry box.

Use the

cursor keys

to set the year, month, date, hour, minute, or second that

you selected in step 6.

Press

SET

ESC

to close the entry box.

10.

Repeat steps 6 to 8 to set the year, month, date, hour, minute, and second.

11.

Use the

cursor keys

to select Set.

12.

Press

SET

. If you selected ON in step 5, the new date and time are displayed in

the lower right corner of the screen. If you cancel the procedure without pressing
SET, the new settings are not reflected on the display.

Summary of Contents for WT500









































































































































































































































































































































































Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands

YOKOGAWA WT500, User Manual

Search results

Summary of Contents for WT500

Reviews:

Related manuals for WT500

Brands by name

Popular brands