14-3
IM 703155-01E
Troubleshooting, Maintenance, and Inspection
14
Code Message
Description and Corrective Action
Reference
Section
849
Not found update files or fail mount device.
The update files could not be found, or the device
–
cannot be mounted.
Servicing required.
850
It could not open the information file.
Servicing required.
–
851
Update file name is different.
Servicing required.
–
852
SUM check error.
Servicing required.
–
853
Program version is old or same.
Check the program version.
–
870
Printer error.
Review the printer settings.
–
880
The backup system was started.
–
3.4, 14.6
The battery is flat or the system storage media
is fail. Maintenance service is required.
890
Memory error.
An error occurred in the display analysis memory.
–
Servicing required.
891
Analyze error.
An error occurred while analyzing the display.
–
Servicing required.
900,
Not found clock generator board.
The clock generator board is not installed or cannot
–
901
be detected. Servicing required.
902
Not found arbitrary waveform generator board.
The arbitrary waveform generator board is not
–
installed or cannot be detected. Servicing required.
903
Cannot communicate with power board. Power off
–
–
immediately.
910-
FPGA configuration failed.
Servicing required.
–
915
916-
FPGA configuration failed at Output$.
Servicing required.
–
918
919
All FPGA configurations failed.
Servicing required.
–
930
Not found calibration data file.
Servicing required.
–
931
Invalid calibration data.
Servicing required.
–
932
Calibration failed at Output$.
Servicing required.
–
933-
Calibration failed at Output$.( No.# )
Servicing required.
–
952
960
100MHz DCM of Output$ does not lock.
Servicing required.
–
961
Cannot write data to waveform memory in Output$.
Servicing required.
–
970
Calibration of Adder/Trigger board failed.( No.# )
Servicing required.
–
971
Saving calibration file of Adder/Trigger board failed.
Servicing required.
–
14.2 Messages and Corrective Actions
