YOKOGAWA UTAdvanced UT32A Technical Information Download Page 3

Page: 3 / 3

3/3

This document is subject to change without notice.

TI 04L01L01-09EN

2011.12.16-00

Set RH (maximum value of PV input range) to 1000.0

°C.

Set RL (minimum value of PV input range) to 0.0

°C (the initial value).

Finally, EXIT is displayed. Select YES and press SET/ENTER to complete the

basic function setup and return to the operating screen. Or, you can select NO

to continue with the Quick Setting.

After finishing the Quick Setting, please adjust the position of the motorized valve.

Revision Information

Document name: Setup Procedure: UTAdvanced Quick Setting (Controlling Furnace Temperature with a
Motorized Valve)
Document number: TI 04L01L01-09EN

First edition: December, 2011
Newly released

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 1000.0

FINISH

EXI

ｔ

YES

MINIMUM

VALUE OF PV

INPUT RANGE

0.0

Summary of Contents for UTAdvanced UT32A

Page 1: ...t to change without notice TI04L01L01 09EN 2011 12 16 1st Edition YK Overview This is an example wiring and settings using the UTAdvanced Quick Setting function for temperature control in a furnace wi...

Page 2: ...will not appear after you restart However you can redo the Quick Setting by following the procedure below 1 Set the Quick Setting parameter QSM to ON and re engage power 2 Set the PV input type parame...

Page 3: ...setup and return to the operating screen Or you can select NO to continue with the Quick Setting After finishing the Quick Setting please adjust the position of the motorized valve Revision Informatio...