YOKOGAWA UP35A, User Manual

Page: 296 / 412

14-1
IM 05P02D41-01EN
Parameter Initialization
14
14.1 Initializing Parameter Settings to Factory
Default Values
Description
Parameter settings can be initialized to the factory default values.
The ladder program is also initialized to the factory default.
All program patterns can not be cleared during program pattern operation. Can be
cleared in RESET mode.
Use the key or LL50A Parameter Setting Software to execute it.
Note
The user setting values (defaults) are not initialized even if the parameter setting values are
initialized to the factory default values.
Setting Details
Parameter
symbol
Name
Display
level
Setting range Menu symbol
F.DEF
Initialization to factory
default value
PRO
-12345: Initialization,
automatically returned to "0"
after initialization.
INIT
P.DEF
Clearing all program
pattern data
PRO
13579: Initialization,
automatically returned to "0"
after initialization.
Chapter 14 Parameter Initialization