6
3.7
L-H and H-L Register Arrangements When 32 bit LONG or
FLOAT Is Selected
For 32 bit integer and FLOAT types, L-H or H-L order can be selected. Set it according to the devices in use.
Figure 3.6.1 32 bit L-H register arrangement
Figure 3.6.2 32 bit H-L register arrangement
3.8
Display Screen (Communication PV1 to Communication PV8)
The measured value of the specified register (MB.ST menu) is displayed. Communication PV number
is shown on the group display. Only when the acquired data type is 16 bit integer, hexadecimal
expression can be used by changing FRMT (MB.ST menu) to HEX.
When the acquired data type is FLOAT and the auto range function is in use, a unit prefix is displayed.
The unit prefix display can be switched between “T, G, M, k, etc.” and exponential type (E03, E00,
etc.). Table 3 shows the unit prefix display during auto range. If the value is smaller than ±p (pico)
range when auto range is in use, “0” is displayed.
k VOLt
Group display
Prefix display
Unit display
Communication
PV display
