YOKOGAWA TA720 User Manual Download Page 193

Page: 193 / 228

14-2

IM 704510-01E

14.2 Messages

The following three types of messages can appear in the center of the screen.

• Error messages

Displayed when an invalid operation is attempted or when the instrument is behaving

abnormally.

• Warning messages

Displayed when the instrument is in a state in which the user needs to be warned.

Example: Measurement data overflow

• Alert messages

Displayed in cases such as before formatting a disk.

Error in Execution (600 to 799)

Error No.

Message

Description

Page

601

Invalid path name.

The path name is not correct.

602

No floppy disk or PC Card inserted.

No floppy disk or card is inserted.

11-1, 11-2

604

Media failure.

The storage media is abnormal.

–

605

File not found.

The specified file does not exist.

–

606

Media is protected.

Attempting to write to a write-protected storage

–

medium.

607

Media was removed while accessing.

The storage medium was removed while it was

–

being accessed.

609

File already exists.

A file with the same name already exists.

11-8, 11-12, 11-16
11-23, 11-32

610

Contains invalid Characters.

Invalid characters are being used.

4-4

611

Media full.

There is not enough free space on the medium.

–

(Directory entry)

612

Media full.

There is not enough free space on the medium.

–

613

Directory is not empty.

Attempted to delete a directory that is not empty.

11-19

614

File is protected.

Attempted to delete a write-protected file.

11-19

615

Physical format error.

Physical format error occurred.

–

616-620

File system failure.

File system is abnormal.

–

621

File is damaged.

Accessed a damaged file.

–

622-641

File system failure.

File system is abnormal.

–

646-654

Media failure.

The storage media is abnormal.

–

656-663

File system failure.

File system is abnormal.

–

665

Cannot load this file format.

Attempted to load a file that was not saved by

11-8, 11-12

the TA720.

666

File is now being accessed.

File is being accessed. Wait unit it is finished.

–

Please wait.

668

Cannot find .HDR file.

There is no .HDR file.

11-11

671

Stop measurement before accessing file. When accessing a file, stop the measurement.

4-2

672

Data to be saved doesn’t exist.

There are no data to be saved.

–

680

Illegal printer head position.

Move the release arm to the HOLD position.

11-28

681

Out of paper.

The roll paper is empty.

11-26

682

Printer over heat.

The printer has overheated.

–

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands