YOKOGAWA TA720 User Manual Download Page 170

Page: 170 / 228

11-32

IM 704510-01E

Explanation

Save Destination Storage Medium

Screen images can be saved to the following three types of storage medium.

FD0:

Floppy disk

CA0:

PC card (when the number of partitions is 1)

CA0-1: PC card (when the number of partitions is 2 or more)

ND0:

Network drive

Output Data Format and Extension

Data in the following formats can be saved to a specified storage medium. The

extension, which is added automatically, and the file size (reference value with half tone

OFF and no data compression) are also indicated.

Output Data Format

Extension

File Size

TIFF

.TIF

Approx. 38 KB (approx. 302 KB)

BMP

.BMP

Approx. 38 KB (approx. 302 KB)

PostScript

.PS

Approx. 78 KB

The value inside the parentheses is the file size when half tone is ON.

Half Tone (for TIFF and BMP formats)

On (Gray) is a tint of 16 gray levels; ON (Color) is 256 colors. No gradation is used for

OFF.

Entering a File Name or a Comment

• Enter a file name using up to 8 characters.

• Enter a comment using up to 25 characters. Comments are displayed at the upper

left corner of the screen and can be saved as a screen image.

• You cannot save to a file name that already exists in the same directory (overwriting

not allowed).

• The file name is common with other saved data, except the extension.

Compressing the Data (only when the data format is BMP)

For BMP format, data can be compressed using RLE and saved. However, data in BMP

format cannot be compressed if half one is OFF.

Auto Naming Function

When Auto Naming is turned ON, files with a three digit number from 000 to 499 are

automatically created when saving the screen image. A common name (up to five

characters, specified by File Name) is attached before the number.

Note

•

Screen images cannot be saved while measurement is in progress (while the START/STOP

indicator is illuminated).

•

When renaming a file (see section 11.9), you can specify the name using up to 25 characters.

However, if the number of characters excluding the extension exceeds 8, only the first 7

characters and the extension are displayed as in TA72000>.SET. The file name can be

confirmed using properties.

•

If waveforms are overlapped when outputting the screen image with half tone set to OFF or in

PostScript format, the waveform color on the screen changes temporarily.

11.13 Saving the Screen Image

Summary of Contents for TA720





































































































































































































































Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands

YOKOGAWA TA720, User Manual

Search results

Summary of Contents for TA720

Reviews:

Related manuals for TA720

Brands by name

Popular brands