< 3. Migration in-house equipment in advance>
21
TI 34P02K71-01E
4th Edition: Jun. 6, 2018-00
TIP
The IP address of the restored NFCP501/NFCP502 is reflected the IP address of NFCP100.
If necessary, change the IP address. If field bus (NFLF111, NFLP121, NFLC121) are used, do the
following after Step B7 restore. Step B7-1: Exported by Resource Configurator, Step B7-2: Change IP
address, and Step B7-3: Imported by resource configurator.
License information can’t be migrated to the FCN-500. Please use the CPU module to the required
licenses are bundled.
● Step B8: Setting each function for the NFCP500
(1) Set some settings for new function or additional configuration by the resource
configurator, and download it.
- Duolet function (
If necessary
)
- CPU duplex configuration (
If necessary
)
- Ethernet port No.3 and No.4 for NFCP502 (
If necessary
)
- SD card (
If necessary
)
- I/O definition (migrating from NFJT100 only)
(2) Set some settings for new function or additional configuration by the resource
configurator,.
- SNTP server
(
If necessary
)
SEE ALSO
For setting of the SNTP server, refer to the "2.2.6 Time Synchronization" TI "STARDOM Engineering
Guide (FCN-500/FCN-RTU)".
Summary of Contents for Stardom FCN-100
Page 2: ...Blank Page...
