manualshive.com logo in svg

YOKOGAWA ScopeCorder DL350, User Manual

Share
Download
YOKOGAWA ScopeCorder DL350 User Manual Download Page 174

12-6

IM DL350-01EN

Averaging Settings (Average Setup)

This is a setting in scope mode.
You can average and compute the peak values of computed data.

Averaging Modes (Average Mode)

The following types of averaging are available.
•  OFF: Averaging is not performed.
• 

Linear averaging (Linear)

: Values are averaged linearly.

• 

Exponential averaging (Exp)

: Values are averaged exponentially.

• 

Cycle averaging (Cycle)

: Values are averaged across cycles.

• 

Peak computation (Peak)

: Peak values are computed.

Linear Averaging (Linear)

The number of values specified by the average count are added and divided by the average count, and the 
resulting values are used to display the waveform. For the equation, see the equation for linear averaging in 

Averaging Mode

.

•  Average Domain (Average Domain)

  Select what to average.

•  Time: A time-domain waveform is averaged.
•  Freq: A frequency-domain waveform is averaged.

•  Average Count (Average Count)

  Set the average count.
  Selectable range: 2 to 128 in 2

n

 steps

Exponential Averaging (Exp)

Using the specified attenuation constant, the instrument attenuates the influence of previous computed data to 
produce averaged values, and uses the results to display the waveform. For the equation, see the equation for 
exponential averaging in 

Averaging Mode

.

•  Average Domain (Average Domain)

  Select what to average.

•  Time: A time-domain waveform is averaged.
•  Freq: A frequency-domain waveform is averaged.

•  Average Count (Average Count)

  Set the average count.
  Selectable range: 2 to 128 in 2

n

 steps

12  Computation Function

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands