YOKOGAWA ScopeCorder DL350 User Manual Download Page 127 | Manualshive

Page: 127 / 258

background image

7-7

IM DL350-01EN

• The number of displayed points on the T-Y waveform display window varies depending on the height of the

extra window. Even if the number of displayed points changes, the vertical resolution does not change.

• When the extra window is displayed, depending on the Zoom Format, the scale values may overlap and be

difficult to read.

Display Ratio of the Main Window (Main Ratio)

When a zoom waveform, FFT, or X-Y waveform is displayed, set the size of the main window in relation to the
overall waveform display area.
•  50%: The main window appears in the upper half of the screen.
•  20%: The main window appears in the upper 20% screen.
•  0%: The main window is not displayed.

Window Layout (Window Layout)

Set the display positions of the zoom window, FFT window, and X-Y window.

• Side: Horizontal
• Vertical: Vertical

Intensity (Intensity)

You can set the intensities of the grid (Grid), cursor (Cursor), and marker (Marker) to values within the range of 1
to 8.

Snapshot (SnapShot)

This is available only in scope mode. Retains the currently displayed waveforms on the screen. This feature
allows you to update the display without having to stop waveform acquisition. It is a useful feature when you
want to compare waveforms.
Snapshot waveforms are displayed in white.
You cannot perform the following operations on snapshot waveforms.
Cursor measurement, automated measurement of waveform parameters, zoom, or computation
You can save and load snapshot waveforms.

Clear Trace (Clear Trace)

Clears all the waveforms that are displayed on the screen.
If you change the display format or perform other similar operations, the instrument redisplays the channel
waveforms, computed waveforms, and loaded waveforms that were displayed before you executed the clear
trace operation.
Snapshot and clear trace features are disabled:
•  When the instrument is in remote mode.
•  When the instrument is printing, when it is executing auto setup, or when it is accessing a storage medium.
•  When go/no-go determination is in progress, when action is in progress, or when searching is in progress.

7 Display

«
...
125
126
127
128
129
...
»

Summary of Contents for ScopeCorder DL350



































































































































































































































































Reviews:

No comments

Related manuals for ScopeCorder DL350

Brand: OfiTE Pages: 24

Brand: Abbott Pages: 296

Brand: dbx Pages: 2

Brand: Ebtron Pages: 5

Brand: Okolab Pages: 4

Brand: National Instruments Pages: 18

CP-4900 Micro-GC

Brand: Varian Pages: 7

Brand: Vapotherm Pages: 2

Brand: Keeler Pages: 54

Brand: RS PRO Pages: 44

Brand: RADWAG Pages: 176

Brand: Ratek Pages: 24

Brand: Amptec Research Pages: 19

Brand: Hanna Instruments Pages: 2

Brand: Veeder-Root Pages: 12

Brand: 365SMART Pages: 20

HP Fire Service

Brand: Neptune Technology Pages: 14

Brand: Leutert Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands