YOKOGAWA SC450G, User Manual

Page: 37 / 84

IM 12D08N05-01E
4-5
<4. OPERATION>
Settings will give all history information on parameter settings concerning the analog
outputs (mA1/mA2) and contact (S1…S4). This logbook is useful to trace back differences
in performance due to changed settings. The events logged in this logbook are user
definable. This is done in:
Commissioning >> Configure Logbook >> Settings Logbook – mA and/or Settings Logbook
– contact
mA1/mA2 shows all (dynamic) events concerning the analog outputs
S1/S2/S3/S4 shows all (dynamic) events concerning the contacts.
Each HMI screen can contain up to 5 events.
As the logbook can contain 50, one can access previous events by selecting events page
1 to 10.
4.4 Information function
In this field an information sign , a warning sign or a fail sign can appear.
Pushing this button, the user gets detailed information about the status of the sensor or the
instrument if applicable.
See troubleshooting (chapter 8) for further details.
4.5 Setup-calibration & commissioning
By pressing the setup key, you get access to the operating system of the converter
based on menus and submenus.
Browse through the list using the key till you find the required menu and press the
key to enter this menu.
It is also possible to press on the or symbol found beside the menu item.
4.6 Secondary-primary value display switch
Pressing on this text block automatically switches the secondary value to the main display
(Large font size).
25.0