![background image](http://html2.mh-extra.com/html/yokogawa/ph450g/ph450g_technical-information_3473787036.webp)
HART Communication
36
TI 12A01A01-60EN
SC450G
Parameter
R/W
Parameter
Value
Unit
Note
Contact logbook
R/W
Contact setup
PID setpoint
PID range
Manual reset
PID I time
PID D time
Control type
DC period time
Max pulse freq.
Alarm setpoint
Alarm direction
Alarm hysteresis
Alarm delay time
Expire time
Erase logbook
R/W
Calibration
Sensor
Predictive Maint.
All logbook
Warn logbook full
R/W
No
Yes
Basic setup
Tag
R/W
Alphanumeric value
Distributor
R
―
Model
R
―
Device information
Descriptor
R/W
Alphanumeric value
Message
R/W
Alphanumeric value
Poll addr
R/W
Numeric value
0 to 15
The use of Built-in DTM
disables the setting
properly.
Num resp preams
R/W
Numeric value
0 to 255
The use of Built-in DTM
disables the setting
properly.
Review
Model
R
―
Distributor
R
―
Write protect
R
―
Manufacturer
R
―
Dev id
R
―
Tag
R
―
Descriptor
R
―
Message
R
―
Date
R
―
Universal rev
R
―
Fld dev rev
R
―
Software rev
R
―
Poll addr
R
―
Num resp preams
R
―
Note : The use of Built-in DTM may make characters displayed as unintended ones. ºC is replaced with
ッ
-C, ºF is replaced with
ッ
-F.
Use a device DTM or check at the front panel display.
n
DD Online Parameters for ISC450G (Device revision 2, DD file revision 2)
CAUTION
Use a device DTM or the front panel display to perform settings/checking.
Built-in DTM may replace characters with unintended ones or disable settings appropriately. Note
that ºC is displayed as
ッ
-C
,
ºF is displayed as
ッ
-F.
Oct. 03, 2017-00