YOKOGAWA ISC40G(S), User Manual

Page: 22 / 36

IM 12D08J02-E-E
22
8 EU DECLARATION OF CONFORMITY
1/2
YOKOGAWA
EU DECLARATION OF CONFORMITY
We: Yokogawa Process Analyzers Europe B.V.
Euroweg 2
3825 HD Amersfoort
The Netherlands
herewith declare under our sole responsibility that the products, model: ISC40G and ISC40S
further specified with model suffix- and option codes: As listed in Annex-1 in this document
are manufactured in accordance with the requirements for CE-marking of products as stated in EC Decision:
768/2008/EC on a common framework for the marketing of products
by applying the following standards:
EN-ISO 9001: 2008 Quality management systems - Requirements
Model ISC40G and ISC40S are:
•
In compliance with the essential requirements of the specific product legislation:
- Pressure Equipment Directive 97/23/EC (PED)
As amended by Regulation (EC) no. 1882/2003, by applying:
Article 3.3: Sound Engineering Practice
- RoHS Directive 2011/65/EU
by applying:
Category 9: Industrial monitoring and control instruments
•
Produced according to appropriate quality control procedures.
Model ISC40S is:
•
In compliance with the essential requirements of the specific product legislation:
- Explosive atmospheres Directive 94/9/EC (ATEX)
As amended by Regulation (EC) no. 1882/2003, by applying the following standards:
EN 60079-0: 2009 Explosive atmospheres – Part 0: Equipment – General requirements
EN 60079-11: 2007 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety “i”
EN 60079-26: 2007 Explosive atmospheres – Part 26: Equipment with equipment protection
level (EPL) Ga
The provisions fulfilled are:

II 1 G Ex ia IIC T4...T6 Ga
Number of the EC-type Examination Certificate: DEKRA 11 ATEX 0063 X
Name of the notified body: DEKRA Certification B.V.
Identification number of the notified body: 0344
Address of the notified body: Meander 1051, 6825 MJ Arnhem, The Netherlands
The CE-mark has been affixed on the product in 2000 for the first time.
If applicable, the product is checked against the latest official released revision of the standards mentioned
above; differences do not affect the certified product identified on this declaration.
Amersfoort - July 01, 2014
H. Leijten
General Manager
Yokogawa Process Analyzers Europe B.V.