2-2
IM IS8000-61EN
2.2 Searching for the Camera and DL950 on the IS8000
Search for the high-speed camera and DL950 on the IS8000 Software. Then, select the device you
want to control, and proceed to the device configuration window.
1.
Click of the
IS8000
icon. A launcher appears.
2.
Click
DAQ
.
DAQ
A Device Search window opens.
3.
For
WIRE
under
Auto
, select the
Ethernet
or
USB
check box according to the DL950
connection.
4.
Under
Manual
, set
WIRE
to Ethernet and
Address
to the IP address of the high-speed
camera.
When the high-speed camera is connected to the Internet, add IS8000.exe in the IS8000 installation
folder as an exception to the Windows Firewall.
5.
Click
Search
. In the list of detected devices, select the check boxes for the DL950 and high-
speed camera, and then click
Open
or
Next
.
If you click
Next
, a window such as Channel Setting and DAQ Setting will appear. Specify the settings (see
Chapter 3 in the
User’s Manual
, IM IS8000-01EN), and then click
Open
.
A DAQ tab window and Monitor tab ribbon appear.
Device Search Window
Search
Next
Open
Enter the high-speed camera’s IP address (as
the camera cannot be detected automatically).
Select the DL950 and high-speed
camera check boxes.
or
Summary of Contents for IS8000
Page 7: ......
