YOKOGAWA IM XL100C-E, User Manual

Page: 100 / 134

5-40
IM XL100C-E
p9 Enable/disable attachment of source URL
ON or OFF
p10 Subject (up to 32 characters)
p11 Header 1 (up to 64 characters)
p12 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Transmit the alarm including instantaneous data
but not including the source URL to recipient 1.
The subject is “ALM”, header 1 is “LP2”, and
header 2 is “LP3”.
YU ALARM,ON,OFF,,,,,ON,OFF,ALM,LP2,
LP3
When sending e-mail at scheduled times
Syntax YU p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11,p12,p13,p14,p15,p16,
p17<terminator>
p1 Content to be sent TIME
p2 Enable/Disable recipient 1 ON or OFF
p3 Interval for sending e-mail to recipient 1
1H , 2H , 3H , 4H , 6H , 8H , 12H , or 24H
p4 Time when sending e-mail to recipient 1
HH:MM
p5 Enable/Disable recipient 2 ON or OFF
p6 Interval for sending e-mail to recipient 2
1H , 2H , 3H , 4H , 6H , 8H , 12H , or 24H
p7 Time when sending e-mail to recipient 2
HH:MM
p8 Enable/disable attachment of instantaneous
data ON or OFF
p9 Enable/disable attachment of source URL
ON or OFF
p10 Recipient 1 subject (up to 32 characters)
p11 Recipient 1 header 1 (up to 64 characters)
p12 Recipient 1 header 2 (up to 64 characters)
p13 Recipient 2 attachment of instantaneous
data enable/disable ON or OFF
p14 Recipient 2 attachment of source URL
enable/disable ON or OFF
p15 Recipient 2 subject (up to 32 characters)
p16 Recipient 2 header 1 (up to 64 characters)
p17 Recipient 2 header 2 (up to 64 characters)
Query YU[ p1]?
Example Send e-mail at 17 hours 15 minutes every day to
recipient 1. Do not include instantaneous data
but include the source URL. The subject is
“GOOD”, header 1 is “LP2”, and header 2 is
“LP3”. Send e-mail at 8 hours 30 minutes every
day to recipient 2. Include instantaneous data but
not the source URL. The subject is
“(XL100)MORNINGDATA”, header 1 is “XL100”,
and header 2 is “TEMPERATURE”.
YU TIME,ON,24H,17:15,ON,24H,08:30,
OFF,ON,GOOD,LP2,LP3,ON,OFF,
(XL100)MORNING,XL100,TEMPERATURE
When sending system notifications
Syntax YU p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11,p12<terminator>
p1 Content to be sent SYSTEM
p2 Enable/Disable recipient 1 ON or OFF
p3 Enable/Disable recipient 2 ON or OFF
p4 Enable/disable attachment of source URL
ON or OFF
p5 Subject (up to 32 alphanumeric characters)
p6 Header 1 (up to 64 alphanumeric
characters)
p7 Reserved
p8 Include instantaneous data ON or OFF
p9 Attachment of source URL enable/disable
ON or OFF
p10 Subject (up to 32 characters)
p11 Header 1 (up to 64 characters)
p12 Header 2 (up to 64 characters)
Query YU[ p1]?
Example Send system notification e-mail messages
including the source URL to recipient 1. The
subject is “SystemAlert”, and header 1 is “LP2”.
YU SYSTEM,ON,OFF,,,,,ON,ON,SystemAlert,
LP2
YV Sets the e-mail transmission
recipient address
Syntax
YV p1,p2<terminator>
p1
Recipient selection
Recipient 1:
1
Recipient 2:
2
p2
Recipient address (up to 10 addresses and
150 characters)
Query
YV[p1]?
Example Set recipient 1 to “Cont@good.com” and
“Adm@good.com”.
YV 1,Cont@good.com,Adm@good.com
Description • To set multiple recipients, separate each
recipient with a comma.
• For e-mail settings, see section 2.11, “Setting
the E-mail Transmission Function” and 2.13,
“Starting/Stopping E-mail Transmissions.”
YW Sets the e-mail transmission
sender address
Syntax
YW p1<terminator>
p1
Sender address (up to 64 characters)
Query
YW?
Example Set the sender address to “XL100.”
YW XL100
Description For e-mail settings, see section 2.11, “Setting the
E-mail Transmission Function” and 2.13,
“Starting/Stopping E-mail Transmissions.”
YX Sets the e-mail SMTP server
name and e-mail transmission
Syntax YX p1,p2,p3<terminator>
p1 SMTP server name (up to 64 characters)
p2 Port number 0 to 65535
5.7 Basic Setting Commands