IM CA71-E
4-19
Source
4
Step 6: Pressing the
key causes the
indicator on the LCD
to change from
to
. The calibrator sources a (main
setpoint)
×
(
n/m) signal between the output terminals for each
range selected.
Step 7: To turn off the output, press the
key once again. The
appears on the LCD and the output terminals are open-cir-
cuited.
Step 8: Pressing the
key one more time cancels the divided out-
put (
n/m) mode.
TIP
To change the main setpoint, temporarily cancel the divided output (
n/m) mode. Set
the main setpoint once again. Then, place the calibrator in the divided output (
n/m)
mode once again.
4.6 Divided Output Function (
n/m)
