YOKOGAWA GS820 User Manual Download Page 161

Page: 161 / 286

11.3 Selecting the Settings Applied at Power-ON

Procedure

Press

SETUP

to display the SETUP menu.

Use the

rotary knob

and

< >

to move the cursor (underline) vertically and select

a setup file that is applied when the GS820 is turned ON.

View

soft key allows you to view the contents of the selected setup file.

Press the

PowerOn Setup

soft key.

An asterisk is appears by the selected setup file.

Explanation

The setup files are the files that are saved in section 11.1, “Saving the Setup Data” and

the factory default setup file (Default.txt). If Default.txt is selected, the GS820 powers on

with the factory default settings.

<<Corresponding Command Mnemonic>>

:SYSTem:SETup:PON <character string>

11-4

IM 765601-01E

Summary of Contents for GS820































































































































































































































































































Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands

YOKOGAWA GS820, User Manual

Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands