YOKOGAWA DX Series Driver Manual Download Page 52

Page: 52 / 56

Yokogawa DX Serial Driver

Device '<device name>' is not responding

Error Type:

Serious

Possible Cause:

1. The connection between the device and the host PC is broken.

2. The IP address assigned to the device is incorrect.

3. The connection cannot be established in the specified timeout period.

4. The response from the device took longer to receive than the amount of time specified in the

"Request Timeout" device setting.

Solution:

1. Verify the cabling between the PC and the PLC device.

2. Verify the IP address given to the named device matches that of the actual device.

3. Increase the Connect Timeout value in the Timeout page of Device Properties.

4. Increase the Request Timeout setting so that the entire response can be handled.

Unable to write to '<address>' on device '<device name>'

Error Type:

Serious

Possible Cause:

1. The connection between the device and the host PC is broken.

2. The named device may have been assigned an incorrect IP address.

3. The address specified may be Read Only or may not exist in the current device.

Solution:

1. Verify the cabling between the PC and the PLC device.

2. Verify the IP address given to the named device matches that of the actual device.

3. Check address availability for the device.

www. ptc.com

Summary of Contents for DX Series
























































Search results

Summary of Contents for DX Series

Reviews:

YOKOGAWA DX Series, Driver Manual, Page: 52 / 56

Search results

Summary of Contents for DX Series

Reviews: