IM 01C21F01-01E
10-2
10. GENERAL SPECIFICATIONS
Communication Requirements “
”:
BRAIN
Communication Distance;
Up to 2 km (1.25 miles) when using CEV polyethyl-
ene-insulated PVC-sheathed cables.
Communication distance varies depending on type
of cable used.
Load Capacitance;
0.22
μ
F or less (see note)
Load Inductance;
3.3 mH or less (see note)
Input Impedance of communicating device;
10 k
1
or more at 2.4 kHz.
Note: For general-use and Flameproof type.
For Intrinsically safe type, please refer to
‘Optional Specifications.’
HART
Communication Distance;
Up to 1.5 km (1 mile) when using multiple twisted
pair cables. Communication distance varies
depending on type of cable used.
Use the following formula to determine cable
length for specific applications:
L=
-
65 x 10
6
(R x C)
(C
f
+ 10,000)
C
Where:
L = length in meters or feet
R = resistance in
1
(including barrier resistance)
C = cable capacitance in pF/m or pF/ft
C
f
= maximum shunt capacitance of receiving
devices in pF/m or pF/ft
<Settings When Shipped> “
”
Tag Number
Output Mode
Display Mode
Operation Mode
Damping Time
Constant
As specified in order
*1
‘Linear’
‘2 sec.’
‘Normal’ unless otherwise specified in order
‘Linear’
Calibration Range
Units
As specified in order
As specified in order
Selected from mmH
2
O, mmAq, mmWG,
mmHg, Torr, Pa, hPa, kPa, MPa, mbar,
bar, gf/cm
2
, kgf/cm
2
, inH
2
O, inHg, ftH
2
O,
psi, or atm.(Only one unit can be specified)
Calibration Range
Higher Range Value
Calibration Range
Lower Range Value
T05E.EPS
Note 1: If Tag No. is no more than 16 alphanumeric characters (including - and ·), it will be written into
the tag plate and amplifier memory settings.
Physical Specifications
Wetted Parts Materials:
Diaphragm and Process connector;
See ‘Model and Suffix Codes.’
Non-wetted Parts Materials:
Housing;
Low copper cast-aluminum alloy with polyurethane
paint (Munsell 0.6GY3.1/2.0)
Degrees of Protection
IP67, NEMA4X, JIS C0920 immersion proof
Cover O-rings;
Buna-N
Data plate and tag;
SUS304
Fill Fluid;
Silicone or Fluorinated oil (optional)
Weight:
1.6 kg (3.5 lb) without integral indicator and
mounting bracket.
Connections:
See ‘Model and Suffix Codes.’
