YOKOGAWA DOX8HS User Manual Download Page 4

ii

IM 19H1D2-01E 

<INTRODUCTION>

  For the safe use of this equipment

n

  Safety, Protection, and Modification of the Product

•  In order to protect the system controlled by the product and the product itself and ensure 

safe operation, observe the safety precautions described in this user’s manual. We assume 

no liability for safety if users fail to observe these instructions when operating the product.

•  If this instrument is used in a manner not specified in this user’s manual, the protection 

provided by this instrument may be impaired.

•  Be sure to use the spare parts approved by Yokogawa Electric Corporation (hereafter simply 

referred to as YOKOGAWA) when replacing parts or consumables.

•  Modification of the product is strictly prohibited.

•  The following symbols are used in the product and user’s manual to indicate that there are 

precautions for safety:

n

  Notes on Handling User’s Manuals

•  Please hand over the user’s manuals to your end users so that they can keep the user’s 

manuals on hand for convenient reference.

•  Please read the information thoroughly before using the product.
•  The purpose of these user’s manuals is not to warrant that the product is well suited to any 

particular purpose but rather to describe the functional details of the product.

•  No part of the user’s manuals may be transferred or reproduced without prior written 

consent from YOKOGAWA.

•  YOKOGAWA reserves the right to make improvements in the user’s manuals and product at 

any time, without notice or obligation.

•  If you have any questions, or you find mistakes or omissions in the user’s manuals, please 

contact our sales representative or your local distributor.

n

  Warning and Disclaimer

The product is provided on an “as is” basis. YOKOGAWA shall have neither liability nor 

responsibility to any person or entity with respect to any direct or indirect loss or damage arising 

from using the product or any defect of the product that YOKOGAWA can not predict in advance.

Summary of Contents for DOX8HS

































Reviews: