5-95
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
5.11 DISPlay Group
:DISPlay?
Function
Queries all display settings.
Syntax
:DISPlay?
:DISPlay:ACCumulate?
Function
Queries all accumulated waveform display
settings.
Syntax
:DISPlay:ACCumulate?
:DISPlay:ACCumulate:MODE
Function
Sets or queries the accumulation mode.
Syntax
:DISPlay:ACCumulate:MODE {COLor|
OFF|PERSistence}
:DISPlay:ACCumulate:MODE?
Example
:DISPLAY:ACCUMULATE:MODE COLOR
:DISPLAY:ACCUMULATE:MODE?
-> :DISPLAY:ACCUMULATE:MODE COLOR
:DISPlay:ACCumulate:PERSistence
Function
Sets or queries the accumulation time.
Syntax
:DISPlay:ACCumulate:PERSistence {<Ti
me>|INFinity}
:DISPlay:ACCumulate:PERSistence?
<Time> = 100 ms to 100 s
Example
:DISPLAY:ACCUMULATE:PERSISTENCE 100ms
:DISPLAY:ACCUMULATE:PERSISTENCE?
-> :DISPLAY:ACCUMULATE:
PERSISTENCE 100ms
:DISPlay:COLor?
Function
Queries all waveform color settings.
Syntax
:DISPlay:COLor?
:DISPlay:COLor:{CHANnel<x>|MATH<x>}
Function
Sets or queries a waveform color.
Syntax
:DISPlay:COLor:{CHANnel<x>|
MATH<x>} {BLUE|BGReen|CYAN|DBLue|
GRAY|GREen|LBLue|LGReen|MAGenta|
MGReen|ORANge|PINK|PURPle|RED|SPINk|
YELLow}
:DISPlay:COLor:{CHANnel<x>|MATH<x>}?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
Example
:DISPLAY:COLOR:CHANNEL1 BLUE
:DISPLAY:COLOR:CHANNEL1?
-> :DISPLAY:COLOR:CHANNEL1 BLUE
:DISPlay:COLor:{PODA_PODB|PODA_
PODBS|PODLState}
Function
Sets or queries the logic waveform color and
state display color.
Syntax
:DISPlay:COLor:{PODA_PODB|PODA_PODBS
|PODLState} {BLUE|BGReen|CYAN|DBLue|
GRAY|GREen|LBLue|LGReen|MAGenta|
MGReen|ORANge|PINK|PURPle|RED|SPINk|
YELLow}
:DISPlay:COLor:{PODA_PODB|PODA_
PODBS|PODLState}?
Example
:DISPLAY:COLOR:PODLSTATE BLUE
:DISPLAY:COLOR:PODLSTATE?
-> :DISPLAY:COLOR:PODLSTATE BLUE
:DISPlay:COLor:SERialbus<x>?
Function
Queries the color settings of all trends the
specified serial bus.
Syntax
:DISPlay:COLor:SERialbus<x>?
<x> = 1 to 4
Description This command can be used on models with the
serial bus option that supports trend display.
:DISPlay:COLor:SERialbus<x>:TRENd<y>
Function
Sets or queries the serial bus trend color.
Syntax
:DISPlay:COLor:SERialbus<x>:TRENd
<y> {BLUE|BGReen|CYAN|DBLue|GRAY|
GREen|LBLue|LGReen|MAGenta|MGReen|
ORANge|PINK|PURPle|RED|SPINk|YELLow}
:DISPlay:COLor:SERialbus<x>:TRENd<y>?
<x> = 1 to 4
<y> = 1 to 4
Example
:DISPLAY:COLOR:SERIALBUS1:TRE
ND1 BLUE
:DISPLAY:COLOR:SERIALBUS1:TREND1?
-> :DISPLAY:COLOR:SERIALBUS1:TRE
ND1 BLUE
Description This command can be used on models with the
serial bus option that supports trend display.
:DISPlay:FORMat
Function
Sets or queries the display format.
Syntax
:DISPlay:FORMat {AUTO|SINGle|DUAL|
TRIad|QUAD|HEXa|OCTal}
:DISPlay:FORMat?
Example
:DISPLAY:FORMAT AUTO
:DISPLAY:FORMAT?
-> :DISPLAY:FORMAT AUTO
