YOKOGAWA Daqstation DX1000, User Manual

Page: 12 / 21

IM 04L4B0-8E
In Case of CompactLogix, etc.
• Command: CIP Data Table Read/Write
The DX supports the following commands:
Target PLC Command name
CompactLogix, etc. CIP Data Table Read/Write
• Specifying data to be accessed
Specify which of the data in the DX should be accessed. For Logix, data can be
accessed by a "tag name".
For an external input channel, separate access destinations are used for reading and
writing.
Data to be accessed Tag name
Type Number Data type
INT16 Data type
INT32 Data type
FLOAT
Measurement
channel
int[000] int[000] real[000]
2 int[00] dint[00] real[00]
• • • • • • • • • • • •
47 int[1046] dint[1046] real[1046]
48 int[047] dint[047] real[047]
Computation
channel
0 int[2000] dint[2000] real[2000]
02 int[200] dint[200] real[200]
• • • • • • • • • • • •
159 int[2058] dint[2058] real[2058]
160 int[2059] dint[2059] real[2059]
Communication
input data
C01 int[000] dint[000] real[000]
C02 int[00] dint[00] real[00]
• • • • • • • • • • • •
C59 int[3058] dint[3058] real[3058]
C60 int[3059] dint[3059] real[3059]
External input
channel
(for writing)
20 int[4000] dint[4000] real[4000]
202 int[400] dint[400] real[400]
• • • • • • • • • • • •
49 int[428] dint[428] real[428]
440 int[429] dint[429] real[429]
External input
channel
(for reading)
20 int[4500] dint[4500] real[4500]
202 int[4501] dint[4501] real[4501]
• • • • • • • • • • • •
49 int[478] dint[478] real[478]
440 int[479] dint[479] real[479]
"• • •" stands for data in numerical order.
Explicit Message