7
IM 04L4B0-8E
Connection to a Network
Cable Connection
Connect the Ethernet cable to the Ethernet port provided on the back of the DX.
Ethernet cable
CAUTION
Be sure to connect an Ethernet cable
with an FCC-compliant plug. Otherwise,
the MV may malfunction.
Settings of the DX
IP Address, Host Information, and DNS Setting, etc.
See Section . of the
Communication Interface User's Manual (IM04L41B01-17E)
.
EtherNet/IP Server Settings
Press
MENU
(to switch to setting mode), hold down
FUNC
for s (to switch to basic
setting mode), and select the
Menu
tab >
Communication (Ethernet)
>
Server
>
Server modes
.
• Server
Set
EtherNet/IP
to
Use
.
Note
The EtherNet/IP server settings can be checked on the Network Information Screen of the DX.
You can open the Network Information Screen by pressing the
FUNC
>
Network info
soft key.
Other
When the DX is in the basic setting mode, communications are available but input/output
data is invalid.