YOKOGAWA AQ6360, User Manual

Page: 5 / 88

iii
IM AQ6360-02EN
Checking the Contents of the Package
After opening the package, check the following items before beginning use. If any of
the contents are incorrect, missing, or appear to be abnormal, please contact your
YOKOGAWA dealer or representative.
AQ6360 Main Unit
Check that the model and suffix on the name plate on the rear of the instrument
match those of your order. When contacting the dealer from which you purchased the
instrument, please give them the instrument number.
MODEL Suffix Description
AQ6360 AQ6360 Optical Spectrum Analyzer
Spec.Code -10 Standard Model
-01 Limited Model
Optical Connector -FC AQ9447(FC) Connector Adapter
1
(Optical Input) -SC AQ9447(SC) Connector Adapter
1
Display -D1 Built-in Display
Power Cord 2 -D UL/CSA Standard and PSE Compliant, Rated
Voltage: 125 V
-F VDE/Korean Standard, Rated Voltage: 250 V
-R Australian Standard, Rated Voltage: 250 V
-Q British Standard, Rated Voltage: 250 V
-H Chinese Standard, Rated Voltage: 250 V
-N Brazilian Standard, Rated Voltage: 250 V
Options
Built-in Light Source /LFC Wavelength Reference Source (FC Connector
3
)
/LSC Wavelength Reference Source (SC Connector
3
)
1 Already attached to the optical input of the AQ6360 front panel.
2 Make sure that the attached power cord meets the designated standards of the country and
area that you are using it in.
3 Already attached to the calibration light source output of the AQ6360 front panel.
For products whose suffix code contains “Z,” an exclusive manual may be included.
Please read it along with the standard manual.
• No. (Instrument Number)
When contacting the dealer from which you purchased the instrument, please give
them the instrument number.