YOKOGAWA AQ6360 User Manual Download Page 31

Page: 31 / 88

2-10

IM AQ6360-02EN

2.4 Turning the Power ON/OFF

Before Connecting the Power

Take the following precautions before turning on the power supply. Failure to do so can
result in electric shock or damage to instruments.

WARNING

• Before connecting the power cord, ensure that the power supply source voltage

matches the rated supply voltage of the instrument and that it is within the
maximum rated voltage of the provided power cord.

• Check that the instrument’s power switch is OFF before connecting the power

cord.

• To prevent electric shock or fire, be sure to use the power cord for the instrument

that is supplied by YOKOGAWA.

• Make sure to connect protective earth grounding to prevent electric shock.

Connect the power cord to a three-prong power outlet with a protective earth
terminal.

• Do not use an extension cord without protective earth ground. Otherwise, the

protection function will be compromised.

• If an AC outlet that conforms to the supplied power cord is unavailable and you

cannot ground the instrument, do not use the instrument.

French

AVERTISSEMENT

• Avant de brancher le cordon d’alimentation, vérifiez que la tension de la source

d’alimentation correspond à la tension d’alimentation nominale de l’instrument
et qu’elle est compatible avec la tension nominale maximale du cordon
d’alimentation fourni.

• Vérifiez que l’interrupteur d’alimentation de l’instrument est sur OFF avant de

brancher le cordon d’alimentation.

• Pour éviter tout risque de choc électrique ou d’incendie, utiliser exclusivement le

cordon d’alimentation fourni par YOKOGAWA et prévu pour l’instrument.

• Relier l’instrument à la terre pour éviter tout risque de choc électrique. Brancher

le cordon d’alimentation sur une prise de courant à trois plots reliée à la terre.

• N’utilisez pas de rallonge si celle-ci n’est pas reliée à la terre, car la fonction de

protection serait compromise.

• En l’absence de prise secteur conforme au cordon d’alimentation et dans

l’impossibilité de mettre l’instrument à la terre, ne pas utiliser l’instrument.

Summary of Contents for AQ6360

























































































Search results

Summary of Contents for AQ6360

Reviews:

Related manuals for AQ6360

Brands by name

Popular brands

YOKOGAWA AQ6360, User Manual

Search results

Summary of Contents for AQ6360

Reviews:

Related manuals for AQ6360

Brands by name

Popular brands