YOKOGAWA AQ2200 Series, User Manual

Page: 92 / 183

Clock Signal Output Terminals (CLOCK OUT and CLOCK OUT)
These terminals transmit 10 GHz non-inverted and inverted clock signals respectively.
Item Specifications
Connector type SMA, female
Output level 0.6 Vp-p (typical) AC-coupling
Offset voltage –2 to +3 V (in 10 mV steps)
Output terminator conditions 50 Ω
AC or DC terminator
Tr/Tf (20 to 80%) 25 ps or less
Duty 50% ± 10%
Data Input Terminal (DATA IN 1 (CDR))
This receives ED data. It has a built-in CDR.
Item Specifications
Connector type 3.5 mm, female
Input level 0.1 to 0.7 Vp-p
Minimum input sensitivity 100 mVp-p or less
Threshold voltage ±0.35 V (in 1 mV steps)
Input terminator conditions 50
Ω
AC-coupling
Bitrate 9.95 to 11.32 Gbit/s
Allowable bitrate ±100 ppm of the PPG’s operation bitrate
Data format NRZ
Data Input Terminal (DATA IN 2)
This terminal receives 10 Gbit/s data.
Item Specifications
Connector type 3.5 mm, female
Input level 0.1 to 0.6 Vp-p
Minimum input sensitivity 100 mVp-p or less
Threshold voltage ±0.3 V (in 1 mV steps)
Input terminator conditions
50
Ω
AC-coupling
Bitrate 9.95 to 10.71 Gbit/s
Clock Signal Input Terminal (CLOCK IN)
This terminal receives 10 Gbit/s clock signals.
Item Specifications
Connector type SMA, female
Input level 0.2 to 0.6 Vp-p
Input terminator conditions 50
Ω
AC-coupling
Frequency The same frequency as DATA IN 2 (synchronized to the data input)
3.3 BERT Module
3-6
IM 735101-01EN