46
IM AQ1210-02EN
Waveform Measurement
Performing Real-time Measurement
3.1, “Performing Real-time Measurement” in the User’s Manual
In real-time measurement, the waveform display is updated in real time. This feature is used to monitor the waveforms.
1.
Tap
OTDR
on the MENU screen.
2.
Tap
Wavelength
to select the wavelength to be measured.
3.
Press
REALTIME
to start a measurement. Pressing it again stops the measurement.
Data display
screen
Waveform is
updated during
measurement.
Laser on indication
Real-time measurement in
progress indication
You can change the measurement
conditions during measurement.
Detects events from the
acquired waveform
When the measurement is
finished, the instrument
returns to the previous soft
key menu.
Save data
directly.
Tap to save the
current waveform
data.
See section 2.4
in the User’s
Manual, IM
AQ1210-01EN.
