17-11
IM 701730-01E
Specifications
17
17.11 General Specifications
Item
Description
Standard operating conditions Ambient temperature:
23
±
2
°
C
Ambient humidity:
55
±
10% RH
Error in supply voltage and frequency:
Within 1% of rating
Warm-up time
At least thirty minutes
Storage conditions
Temperature: –20-60
°
C
Humidity:
20 to 80% RH (no condensation)
Operating Conditions
Temperature: 5-40
°
C
Humidity:
20 to 80% RH (when the printer is not used)
35 to 80% RH (when the printer is used)
Storage altitude
3,000m or less
Operating altitude
2000 m or less
Rated supply voltage
100 to 120 VAC/220 to 240 VAC
Permitted supply voltage range 90 to 132 VAC/198 to 264 VAC
Rated supply voltage frequency 50/60 Hz
Permitted supply voltage
48 to 63 Hz
frequency range
Power fuse
250 V 4 A time lag, VDE/SEMKO/UL/CSA certified.
Maximum power consumption 200 VA (when using the printer)
Withstanding voltage
1.5 kVAC for one minute.
(between power supply and case)
Insulation resistance
500 VDC,. 10 M
Ω
or more at
(between power supply and case)
External dimensions
220mm (W)
×
265.8mm (H)
×
264.1mm (D)
(details on page 17-13)
(When printer cover stored, excluding projections).
Weight
DL1735E/DL1740E/DL1740EL:
Approximately 5.4kg.
(No options)
DL1720E:
Approximately 5.2kg.
Instrument’s cooling method
Forced air cooling, exhaust from rear.
Installation position
Horizontal (note that the stand can be used to tilt the instrument) or vertical, stacking prohibited.
Recommended calibration
1 year
period
Battery backup
Setup data and clock are backed up with the internal lithium battery
Battery life: Approx. 5 years (at ambient temperature of 23
°
C )
However, no condensation
may be present
