1-2
IM 2553A-01EN
Rear Panel
Power inlet
Connect the power cord.
→ sec. 3.3
Nameplate
GP-IB port
Used when controlling the 2553A
remotely from a PC through the GP-IB
interface
→ ch. 7
Ethernet port (100BASE-TX/10BASE-T)
Used when controlling the 2553A remotely from a PC through the Ethernet
interface
→ ch. 8
USB port (type B)
Used when writing user-defined files for thermocouple and RTD temperature output from a
PC to the 2553A (USB mass storage)
→ sec. 6.4
Used when controlling the 2553A remotely from a PC through the USB interface (USB-TMC)
→ ch. 9
External RJ sensor
input terminal
Used to connect an
external RJ sensor
→ sec. 3.6, 6.5
Top and Bottom Panels
Vent holes
Do not block the vent holes
when installing the 2553A.
→ sec. 3.2
Top panel
Bottom panel
Rear legs
→ sec. 3.2
1.1 Panels
