Yoer EMF01S LATTIMO, Manual

Page: 20 / 32

ENGLISH
20
FIRST USE
I Cleaning and priming the unit prior to first use.
1. Please make sure the all indicators are off by pressing the power button and
it is unplugged from the electrical outlet.
2. Remove all of protective stickers from the unit.
3. Remove and wash the water reservoir, the milk reservoir, the porta-filter, all
filters and measuring scoop in a mixture of mild detergent and water. Rinse
each thoroughly, dry and place them back into the unit.
4. To clean the inside of the appliance, follow the steps listed on the
“PREPARING CAPPUCCINO” section using water in both reservoirs and no
coffee in the filter. Do not immerse the appliance in water or attempt to reach
any of its internal parts.
II Run the steam cycle for 90 seconds by following the steps below.
1. Fill water reservoir with cold water between the MIN and MAX levels.
2. Fill the milk reservoir with cold water between the MIN and MAX levels.
3. Select one of the filters and place it on the porta-filter. Place the porta-filter in
the unit ensuring it is properly locked. Place a cup under it and make sure the
tip of the frothed milk dispensing tube is inside the cup.
4. Plug the appliance into the appropriate outlet.
5. Turn the power button on, and all the indicators start blinking until the espresso
machine will be warmed up.
6. Once these lights become solid, press middle switch. Once this process will be
completed, all the indicators will turn on solid.
7. Now your unit has been primed and is ready to be used.
NOTE: In order for your unit to work properly time after time, clean it after
every use.