ENGLISH
19
FILLING THE WATER TANK
When the water level is too low, the safety switch will cut out operation of the mist function.
Unplug the unit and refill the water tank for further operation. Never touch the water tank when the unit is
plugged into a power source.
CAUTION
: To allow long and efficient operation always use distilled or filtered water. Always empty out
water tank after you finish using, to avoid limescale and other pollution in its interior. Use only water in the
water tank, do not add chemicals, oils or any other additive.
Place the fan on a flat, stable surface, then add water for the humidifying function as follows:
4. Turn the water tank
upside-down over the sink.
1. Open the water tank
cover.
2. Lift the water tank
straight up to disengage.
3. Carefully remove the
water tank from the unit
(watch for spills).
6. Carefully put the water
tank back into the unit.
Make sure it is seated
properly to avoid leaks.
5. Unscrew the lid and fill
the tank with clean, cold
water. Replace the lid and
tighten it securely.
