2
5.
Important:
On the top of both fans are
directional arrows indicating the correct
orientation for the fans. Make sure that the
new fan matches the air flow orientation as
shown below. (air flow direction pointed
towards chamber)
6.
Install the new outer fan to the hopper end
panel using the 4 screws removed in step 3.
(#10 x 3/4” Hex Head Self-Drilling Screws)
7.
Install the fan diffuser to the outer fan using the
two 632x38MS screws and two 632HN nuts.
8.
Disconnect the two wires (one green, one
white) from the inner fan.