Yoder Smokers S Series, Operation Manual, Page: 49 / 70

49
FUSE REPLACEMENT
If there is no display and the LED light isn’t on after the power button has been pushed, check the power
source to verify the GFCI hasn’t tripped. If the power source is working, check the Yoder fuse. The fuse holder
is located on the hopper end panel (FIG 63) . Verify that the power is off and the Yoder is unplugged. Insert
a small flat blade screwdriver into the slot on the top of the fuse container and twist it counterclockwise to
open. If the fuse is blown, replace it with the supplied replacement fuse. (The fuse is a 5-ampere quick-blow
fuse.) Reconnect the power and turn the Yoder on. If the fuse blows again, contact us for technical support.
STORING YOUR GRILL
Cover your Yoder Smoker to protect it from the weather and to keep the pellets dry. If storing your cooker
inside, be sure the smoker is cool to the touch before moving it inside. Inspect the hopper and cooking
chamber for any remaining embers before storing the unit.
FIG 63