Legacy PD Compatible
Minimum load sensing
Fault Protection Input
LFP (Link Fault Pass-through) and FEF (Far End Fault)
Supports one 10/100/1000Base-T Gigabit Ethernet UTP RJ45 port and one
100/1000Base-FX Gigabit Ethernet Fiber SFP port
Supports 10/100/1000Base-T auto mode on the UTP port
Supports 802.3x flow control for full-duplex ports and backpressure for
half-duplex ports
Supports 9KByte jumbo frame
Supports SFP multi-mode/single-mode fiber plugs with different distances.
DIP switch settings
DIP 1: OFF for Normal operation
DIP 2: To Select SFP for 100Base-FX or 1000base-FX
DIP 3: To enable LFP function
RESET push button to activate DIP Switch new settings
RoHS Compliance
Technical Specifications
Standards
IEEE802.3 10Base-T
IEEE802.3u 100ase-TX
IEEE802.3z/ab 1000Base-T
1000Base-FX
IEEE802.3x full-duplex flow control
Cable
UTP
：
Cat. 5e cable up to 100m
Fiber
：
multi-mode for 1-2km
single-mode for 10-50km
Power
Input
：
100~240VAC, 47~63 Hz
Output: 56VDC up to 30Watts
Ambient Temperature
：
0~50
°
C
Humidity
：
5~90
％
Dimensions
：
39 (H) x 85 (W) x 205 (D) mm
Certification
：
FCC Part 15 Class A, CE Mark
