E-HEATER
E-Heater is the auxiliary electric heating function. When your system is in HEAT mode, you can turn on the
E-Heater function for improved efficiency. Once this function is set, E-Heater will run automatically whenever
the system is in HEAT mode.
To turn ON the E-HEATER function, while the system is running in HEAT mode, press the Function button
select E-Heater. Once the E-Heater icon is visible, press the Enter/Cancel button.
On Indoor Units that do not have an auxilary heater, this Mode does not function.
BLOW
The BLOW function is a maintenance function designed to prevent mildew from growing on the coils of your
Indoor Units. By running the fan on your Indoor Unit for a few additional minutes after normal operation, it
evaporates water that may have condensed on the coil. This is helpful in very humid climates.
When the BLOW function is activated, the Indoor Unit fan will run at low speed for 2 minutes to help
evaporate any moisture that is present on the coil. When BLOW function is not active, the system will shut
off immediately. The BLOW function will only work when the Indoor Unit operates in COOL or DEHUMIDIFY
modes, and does not operate in FAN or HEAT modes.
While your Indoor Unit is running in COOL or DEHUMIDIFY Mode, press the Function button until BLOW is
selected. Once it is highlighted, press the Enter/Cancel button. The BLOW function is now activated.
To turn OFF the BLOW Function, press the Function button until the BLOW setting is selected, and hit the
Enter/Cancel button. The BLOW button will no longer appear on the LED display.
OTHER FUNCTIONS
LOCK
When running your system, you can press the and simultaneously for 5 seconds the LOCK icon will
appear on your LED display, and it will LOCK the Wall Mount Control.
To Unlock press the and simultaneously for 5 seconds, and the LOCK icon will turn off.
When the LOCK function is active, no buttons will respond.
MEMORY
When the MEMORY Function is activated, the MEMORY icon will be displayed. In the event of a power failure,
the system will store all of the functions and modes you have programmed into your YMGI system. When
power is restored, the unit will come online with the last settings that you programmed. MEMORY will store
your MODE, TEMPERATURE, FAN SPEED and LOCK state.
REMOTE CONTROL FUNCTIONS
MIN
I SPL
ITS
•
VRF
•
PTAC
•
SOLAR
•
LED
LIG
HT
IN
G
Your Modern Green Idea
6
YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [email protected] • ymgigroup.com • 866-833-3138
