YMGI WMMS-09K-V2A(57)2 Installation Instructions Manual Download Page 10

BRIEF UNIT INFO

Find the cooling/heating load capacity of the space where the unit will be in service. Select matched WMMS units 
for the space. Under sizing or over sizing equipment is NOT recommended.

Mini Split Wall Mount Systems come with three types: cooling only and heat pump and heat pump with electric 
heater. These units can be easily wired. Either indoor unit or outdoor unit can be used with any matched 
comparable outdoor unit or indoor unit as long as they have matched size and control. Must refer to electrician 
before doing so. 

* Indoor unit operates much quieter than air diffuser of central air conditioning system.
* Stylish design of indoor unit adds beauty to rooms.
* Connection pipe, refrigerant usage is much saved compared to installing up-flow condensing units on the 
   ground and long copper/wire lines needed between indoor and outdoor units.
* Contractor work is eased and time is saved.
* Efficiency and lifetime of system is increased.

IMPORTANT NOTES FOR UNIT OPERATION ABMIENT & SIZING

Since the outdoor units can be installed on a wall or balcony (close to the indoor unit) the following are some 
benefits for contractors and customers:

Each system is thoroughly tested before leaving the factory.  Each unit is acoustically, thermally and 
systematically designed to give optimum quality and reliability.

P17 OF 44

INDOOR UNIT-MAJOR COMPONENTS

Remode Control

UNIT ENGINEERING SUBMITTALS-MECHANIAL

UNIT ENGINEERING SUBMITTALS-MECHANIAL

P18 OF 44

09K

12K

W

H

D

30.3 

30.3 

11.1 

11.1 

7.9

18.7

27.0

25.4

35.3

7.9

18.7

33.1

25.4

44.1

18K

24K

34.1 

12.0 

8.25

39.7 

12.4 

8.7

INDOOR UNIT

(Top view)

(Bottom view)

Tube exit option-right

(Right view)

(Left view)

(Front view)

D

Tube exit option-left

Unit

Model

Dimensions (In)

Operation

Net

Weight (Lbs)

W

H

D

Unit

Model

Dimensions (In)

Operation

Net

Weight (Lbs)

18K

21.25 In

27 In

24K

09K

12K

10.3 In

18.75 In

3.2 In

7.375 In

21.4 In

10.3 In

18.75 In

3.2 In

7.375 In

21.4 In

10.5 In

11.4 In

BRIEF UNIT INFO

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

Auto-Directional Louvers 

(Up and Down)

Test/Reset Switch

Front Panel 

or Faceplate

Air Fiter

Manual or Motorized Louvers 

(Left to Right, Right to Left)

Summary of Contents for WMMS-09K-V2A(57)2
























Reviews: