YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
31
10. TEMP
Press this button, to select the displayed indoor temperature setting for indoor ambient
temperature or set temperature. When the indoor unit firstly power on it will display the set
temperature, if the temperature’s displaying status is changed from normal status to ”
“, the
indoor unit will display the ambient temperature, after 5 seconds the indoor unit will resume
showing the set temperature.
11.
QUIET
Press this button, the unit will start the Auto Quiet mode. The remote will display the
“
“icon
"
Press QUIET again to turn off mode (Quiet OFF the icon of is not displayed on the remote
screen). When the unit is powered on, the Quiet OFF is defaulted.
Note:
the Quiet function cannot be used in Fan or Dry mode. Under the Quiet mode the fan
speed cannot be adjusted.
12. CLOCK
Press CLOCK button. The
icon will begin blinking. Within 5 seconds, press + or
– button to
adjust the current time. Holding down either button longer than 2 seconds increases or
decreases the time by 1 minute every 0.5 second and then by 10 minutes every 0.5 second.
Once time is set, press the CLOCK button again to confirm the settings. The time will be
constantly displayed on the remote.
13. T-ON/ T-OFF
Press T-ON button to initiate the auto-ON timer. To cancel the auto-timer program, simply press
this button again.
After pressing this button, the
icon will disappear,
and “ON “blinks. 00:00 is displayed for ON
time setting. Within 5 seconds, press + or - button to adjust the time value. Each press of either
the “+” or “-“ button will change the time setting by 1 minute. Holding down either button rapidly
changes the time setting by 1 minute and then 10 minutes. Within 5 Seconds after setting, press
TIMER ON button to confirm. Press T-OFF button to initiate the auto-off timer. To cancel the auto-
timer program, simply press the button again. TIMER OFF setting is the same as TIMER ON.
14. TURBO
15. Press this button to activate / deactivate the Turbo function. Turbo enables the unit to reach the
preset temperature in the shortest time. In COOL mode, the unit will blow strong cooling air at
super high fan speed. In HEAT mode, the unit will blow strong heating air at super high fan
speed.
16. LIGHT
17.
Press LIGHT button to turn on the display’s light. Press this button again to turn off the display
light. If the light is turned on, the
icon is displayed. If the light is turned off the icon is not
shown.
18. X-FAN
Pressing X-FAN button in COOL or DRY mode, the
icon is displayed and the indoor fan will
continue operation for 10 minutes in order to dry the indoor unit after you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
