YMGI M2 SERIES User Manual Download Page 2

CONTENTS

End User Technician Contact of Technical Support-Manufacturer 

Toll Free Number: 1-866-833-3138 x 703

Email: [email protected]

P1 OF 34

P2 OF 34

Manufacturer shall  not be responsible for problems due to Do-it-Yourself(DIY) installation or other bad installation 
or abnormal usage of this unit such as unreasonable capacity or efficiency expectation of the unit, working out of 
the designed or recommended outdoor weather conditions, and

A bad connection of the connecting pipes.

Folding or deterioration of connecting pipes during installation.

Shocks during the installation due to unprofessional or incautious installation or usage.

An installation or usage not conforming to the regulations or factory recommendations.

Possible costs, services or disasters caused by such bad installation or abnormal usage.

A not very effective operation of the air-conditioner due to a bad vacuum.

A distance between indoor and outdoor units that exceeds the recommended ranges.

The presence of foreign substances left in the air-conditioner during installation.

The under performance due to such bad installation or abnormal usage.

Water leakage problems due to such bad installation of drain hoses.

Refrigerant or oil leakage due to unsuccessful pipe connections.

Problems caused by rough handling unit during bad installation or abnormal usage.

IMPERATIVE

LIABILITIES

Always Keep Your External Unit In A Vertical Position During Handling.

All Units Shall Be Installed by Experienced or Licensed HVAC Contractor or Technician. 
Customers must NOT Install This Unit by Themselves or Hire Non-Licensed Persons to Do the Job. We 
Decline Any Consequences, Including Damage to Unit, People, Properties and Others Resulted from Such 
Behaviour.

Following NEC, State and Local Codes and Installation Instructions of All Units, Otherwise Unit Warranty Will 
Be Void and Serious Damage To People Or Property May Be Caused.

Read Manuals Thoroughly before Installation.

YMGI Group Shall NOT Take Any Responsibilities for Any Damage or Loss Due to Improper Installation or 
Operation or Natural Disaster.

Don't Supply Power until All Wiring and Tubing and Checking is Completed.

Ground the Unit Following Instructions and NEC, State and Local Codes.

Connect All Wiring Securely. Loose Wire or Other Bad Contact May Cause Arc or  Overheating and Fire 
Hazard.

(End user needs to contact installation or service technician to check the unit, before the 

technicians contact manufacturer technical support-straight technical communication)

16

15

18

20

21

22

22

23

25

27

29

2

3

14

17

19

32

33

13

21

INDOOR UNIT-MAJOR COMPONENTS

IMPORTANT NOTES

BRIEF INTRODUCTION TO MINI SPLIT WALL MOUNT SYSTEM

SAFETY-ATTENTIONS

MINI WALL MOUNT SYSTEMS-MODELS

SYSTEM COMPONENTS-GENERAL

SYSTEM COMPONENTS & INSTALLATION CLEARANCE: SINGLE ZONE

SYSTEM COMPONENTS & INSTALLATION CLEARANCE: DUAL ZONE

SYSTEM COMPONENTS & INSTALLATION CLEARANCE: TRIPLE ZONE

SYSTEM COMPONENTS & INSTALLATION CLEARANCE: QUAD ZONE

REMOTE OR LINE CONTROL

LED DISPLAY PANEL

REPARATION OF REMOTE OR LINE CONTROL

FUNCTIONS-REMOTE OR LINE CONTROL

OPERATION OF THE UNIT

SERVICE AND MAINTENANCE

DOUBTING ABOUT UNIT FAILURE

LIMITED PRODUCT WARRANTY POLICIES

LIMITED PRODUCT WARRANTY REGISTRATION CARD

WARRANTY AND TECH. SUPPORT

USER NOTES AND SERVICE LOG

12

34

MEMO

31

DIAGNOSIS CODE & TROUBLE-SHOOTING GUIDELINE

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

CUSTOMER AND TECHNICIAN MUST READ

4

Summary of Contents for M2 SERIES



















Reviews: