the external alarm will operate, but the access control unit’s buzzer will not operate.
4.
To remove the alarm
Read valid card or input master code can remove the alarm. If there is no operation, the
alarm will remove automatically after 1 minute.
We create security
4
To Reset to Factory Default
Keypad access control(YK
-
1168A/YK
-
1168B), power off, keep pressing and power on, the
*
logo will turn in orange after 1 second, release it until hearing two shot beep , then hearing a long
beep, enter normal mode, reset to factory default setting is successfully.
Touch panel access control(YK
-
1068A/YK
-
1068B) ,power off, power on, the logo will turn in
orange after 1 second, press within 1 second, release it until hearing two shot beep, then
*
hearing a long beep, enter normal mode, reset to factory default setting is successfully.
Remark: Reset to factory default, the users’ information is still retained.
Sound and Light Indication
Master Setting
Enter Master Operation Mode. it will return to normal mode if there is no right Master PIN
input in 5 seconds. After input of right master PIN, it will also return to normal mode if there
is no valid operation in 30 seconds. press“#” to confirm the input number, return to previous
menu by press“ ”,the logo light will indicate the operation mode.
*
Note that to undertake the following programming, the master user must be logged in
1.Basic Operation